en
59
5.3 Cleaning with warm drinking water
Use a small, clean brush to remove heavy soiling. For
hygiene reasons, this brush must be used exclusively for
cleaning the nebuliser.
Then rinse all parts thoroughly (for a least 1 minute) in warm
running water (approx. 40 °C without dishwashing liquid) to
remove all remaining dishwashing liquid.
Pour out the water that has collected in the individual parts.
You can remove excess water more quickly by shaking the
parts.
Place the disassembled compo-
nents in warm drinking water with a
little dishwashing liquid with no skin
protecting or disinfecting additives
(dosage according to the manufac-
turer's recommendations) for about
5 minutes, until the residues of the
inhalation solution and other con-
taminants are removed.
To Next Page
Loading...