Use the number buttons on the remote to enter the track number you’d like to hear.
The numbers appear in the first box. The screen displays:
The cursor jumps to the next spot in the program list section. Make sure the box is
highlighted and enter your next track.
Continue adding tracks until your program is complete. You can play your program
by highlighting START and press (PLAY).
Note: If you want to program more than ten tracks, highlight NEXT and press (PLAY)
to go to the next page.
To exit program playback, press the (STOP) button twice.
DVD & CD shuffle or random play
The player can play CDs or DVDs in random order. Here’s how to do it:
While a disc is playing, press (PLAY MODE) and select shuffle or random play. The
screen shows Shuffle or Random.
Press (PLAY) to start shuffle or random play. The player automatically selects a
track to play. To exit shuffle or random play mode, press (STOP) twice.
DVD & CD digest play
This function can be used to look through the content of the track or disc.
Playing DVDs
Press DIGEST while a disc is playing.
The screen prompts you to select from Title Digest, Chapter Digest, Title
Interval, or Chapter Interval.
Use the (DOWN) or (UP) buttons and then select TITLE DIGEST. Press
PLAY to confirm. The player begins to scan the titles, and shows the starting
picture of each title on the screen.
Each page has six pictures. Use the direction buttons to select NEXT on the
screen, and press (PLAY) to go to the next page.
To exit the digest feature, use the direction buttons to select EXIT on the
screen and press (PLAY) to confirm.
Note: If you have stored bookmarks on a DVD disc, there will be one more digest
option: BOOKMARK DIGEST.
- 30 -
To Next Page
Loading...
