14
Initial Settings - VCR
Initial Settings - VCR
By using the VCR Setup menu, you can make
various adjustments to items such as clock setting,
and timer recordings.
Your DVD+VCR allows remote control adjustment of
several features.
General Operation
1. Press VCR on the remote control.
2. Press MENU and the MAIN menu will appear.
3. Use v / V to select the desired menu, then press
ENTER/OK.
4. Use v / V to choose a desired option on the seleted
Menu. Then use b / B to choose a desired setting.
5. Press MENU when finished.
Note:
Menus remain on-screen for 3 minutes.
CLOCK
The DVD+VCR gives you two ways to set the time
and date: the Auto Clock Feature or Manually.
Auto Clock Set
• AUTO CLOCK SET
The Auto Clock Set feature is set to ON at the fac-
tory. In the ON setting, the DVD+VCR looks for a
channel carrying XDS (Extended Data Services)
information. XDS updates the clock using the
Coordinated Universal Time.
- Use b / B to choose ON or OFF.
• DAYLIGHT SAVINGS
You can turn Daylight Savings On or Off manually.
If you choose “AUTO”, the DVD+VCR sets the
clock using the DST information broadcast in the
signal (channel).
- Use b / B to choose AUTO, ON or OFF.
• TIME ZONE
You can set your local Time Zone manually. If you
choose “AUTO”, the DVD+VCR sets the clock
using the first Coordinated Universal Time informa-
tion it finds in a broadcast signal.
- Use b / B to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
PACIFIC, ALASKA or HAWAII)
.
Notes:
• The Auto Clock feature enables the DVD+VCR to set up
the clock while the DVD+VCR is turned off.
• There are cases where the TV station does not send or
sends wrong date and/or time information and the
DVD+VCR sets the incorrect time. If this happens we
recommend that you set the clock manually.
Manual Clock Set
Use
v / V / b / B
to enter the necessary information.
•
MONTH
: Choose the month.
•
DAY :
Choose the date.
The day of the week will display automatically.
•
YEAR : Choose the year.
•
TIME : Choose the time.
Press and hold b / B to advance clock continuously.
Notes:
• If setting the clock manually, “AUTO CLOCK SET” must
set to “OFF”. If it is set to “ON”, an incorrect date and/or
time will be entered again when the DVD+VCR is turned
off.
• The clock uses the 12-hour system. Be sure to set AM
and PM correctly.
PROGRAM
The Timer Recording function allows you to record up
to 8 programs within a period of one year. (See pages
22-23).
To Next Page
Loading...
