33
Operation
Programmed Playback
Programmed Playback
The program function enables you to store your
favourite tracks from any disc in the player memory.
A program can contain 30 tracks.
1. Insert a disc.
AUDIO CD or MUSIC menu appears.
2. Press PROGRAM.
The mark will appear to the right of the word
“Program” on the right side of the menu screen.
Note:
Press PROGRAM again, the mark will disappear to
exit the Program Edit mode.
3. Select a track on the “List”, then press
ENTER/OK to place the selected track on the
“Program” list. Repeat to place additional tracks
on the list.
4. Press B.
Select the track you want to start playing on the
“Program” list.
5. Press PLAY (H) or ENTER/OK to start. Playback
begins in the order in which you programmed the
tracks. Playback stops after all of the tracks on
the “Program” list have played once.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MUSIC)
list and then press PLAY (H).
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
Note:
If you press > once during Repeat Track playback, the
repeat playback will be cancelled.
Erasing a Track from “Program” List
1. During STOP mode, press PROGRAM and
mark will appear.
2. Use B / v / V to select the track that you wish to
erase from the Program list.
3. Press CLEAR. Repeat to erase additional tracks
on the list.
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
mark will appear.
2. Use B / v / V to select “Clear All” in the
“Program” list, then press ENTER/OK.
Note:
The programs are also cleared when the disc is removed.
To Next Page
Loading...
