Insignia NS-19D220MX16-A User Manual

54
NS-19D220NA16-A / NS-19D220MX16-A
www.insigniaproducts.com
4 Press S or T to highlight Cable / Satellite Box,
Cable from the wall, or Antenna, then press
ENTER.
A If you select Cable / Satellite Box, a screen
opens that shows you all the ways you can
connect a box to your TV.
Press ENTER. When a message tells you setup
is complete, press EXIT to close the menu.
Press INPUT to open the INPUT SOURCE list,
then press
S or T to select the video input
source you connected your TV to and press
ENTER. Your TV switches to the input source
you selected.
B If you select Cable from the wall your TV scans
for available channels. The scan may take
several minutes.
When the scan is complete, the first channel
your TV found plays in the background.
C If you select Antenna, your TV scans for
available channels. The scan may take several
minutes.
When the scan is complete, press EXIT to close
the menu. The first channel your TV found
plays in the background.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.

Insignia NS-19D220MX16-A Specifications

General

Brand	Insignia
Model	NS-19D220MX16-A
Category	LED TV
Language	English