Insignia NS-19D220MX16-A User Manual

76
NS-19D220NA16-A / NS-19D220MX16-A
www.insigniaproducts.com
INlink (CEC-compatible) device
Problem Solution
My TV is not
displaying the
video from the
connected CEC
device.
• Make sure that the HDMI cable
is connected securely to your
TV and the device.
• Make sure that the device is
connected to your TV with an
HDMI cable.
• Make sure that the device is a
CEC device. See the
documentation that came with
the device for more
information.
• Press INPUT and make sure that
the correct video input source is
selected. See Selecting the
video input source on page 40.
• Make sure that the INlink
feature is turned on. See
Turning INlink on or off on
page 43.
• Try adjusting the TV picture. See
Adjusting the TV picture on
page 49.
• If the device is not an Insignia
device, it may not be
compatible with your TV.
My TV is not
playing the
audio from the
connected CEC
device.
• Make sure that the HDMI cable
is connected securely to your
TV and the device.
• Make sure that the device is
connected to your TV with an
HDMI cable.
• Make sure that the device is a
CEC device. See the
documentation that came with
the device.
• Make sure that the TV volume is
turned up and not muted.
• Try adjusting the TV sound. See
Adjusting sound settings on
page 51.
• Make sure that the TV speakers
are turned on and not muted.
See Adjusting sound settings
on page 51.
• Make sure that the INlink
feature is turned on. See
Turning INlink on or off on
page 43.
•If you have connected an HDMI
CEC audio receiver, adjust the
volume on the receiver. When
your TV detects an audio
receiver, the TV speakers turn
off and sound plays through
receiver speakers only.
• If the device is not an Insignia
device, it may not be
compatible with your TV.
• If you are using a home theater
system, sound bar, or external
speaker system, make sure that
it is turned on and is not muted.
• If you are using a home theater
system, sound bar, or external
speaker system, make sure that
you have selected the correct
output mode.
• If you are using a home theater
system, sound bar, or external
speaker system and have
connected with a digital cable,
go to the Audio menu, highlight
Digital Audio Format/Audio
Delay, then press ENTER. Set
the Audio Format option to
PCM. See the Digital Audio
Format/Audio Delay option in
Adjusting sound settings on
page 51.
Problem Solution

Insignia NS-19D220MX16-A Specifications

General

Brand	Insignia
Model	NS-19D220MX16-A
Category	LED TV
Language	English