To Next PageTo Next Page
How to fix an Insignia LED TV remote that is not working?
First, make sure the power cord is correctly connected to your Insignia LED TV and the power outlet. Also, ensure that there are no obstructions between the remote and the TV's sensor. Point the remote directly at the sensor. Verify that the batteries are correctly installed or replace them with new ones.
Why is my Insignia NS-28E200NA14 remote control not working?
If your Insignia LED TV remote control isn't working, make sure the TV's power cord is properly connected. Ensure there are no obstructions between the remote and the TV's sensor. Point the remote directly at the sensor. Remove any plastic wrapping from the batteries. Verify the batteries are correctly installed, and replace dead batteries with new ones.
Why is the picture quality on my Insignia NS-28E200NA14 LED TV good on some channels and poor on others?
If your Insignia LED TV picture quality varies, being good on some channels and poor on others while the sound remains good, it may be due to a weak signal from the broadcaster or cable TV provider. If you're connected to cable or satellite TV without a set-top box, consider installing one to improve signal reception and picture quality. Contact your provider for details on upgrading.
What to do if my Insignia LED TV has no power?
First, ensure the power cord is securely connected to both your Insignia LED TV and the power outlet. If that doesn't work, unplug the power cord, wait for about 60 seconds, and then plug it back in before turning on your TV. Interference from other devices may also be a factor; try turning off nearby devices one by one to see if that resolves the issue, and then move the interfering device further away from the TV.
What to do if my Insignia NS-28E200NA14 LED TV has no picture and no sound?
To resolve a blank screen with no sound on your Insignia LED TV, try the following: First, press the power button on the TV or remote. Ensure the 'Audio Only' option is off. Check that video cables are securely connected. Adjust the contrast and brightness settings. Verify the power cord is plugged in. Select the correct video input source. Try another channel to rule out station issues. Confirm the incoming signal is compatible. Ensure the antenna or cable TV is properly connected. Finally, check closed caption settings, as some modes can block the screen.
What does it mean when my Insignia NS-28E200NA14 says no signal?
If your Insignia LED TV displays a “No signal” error message, first press the INPUT button to select the correct input for your device. If you're using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input on your TV to view those channels.
Why does my Insignia LED TV have picture but no sound?
If your Insignia LED TV has good picture but no sound, try these steps: Increase the volume and make sure the sound isn't muted. Disconnect any headphones, as they disable the TV speakers. Ensure the correct audio mode is selected and that the audio cables are securely connected. Verify the antenna or cable TV is properly connected. If using an antenna, check the digital channel signal strength. Finally, test with new audio cables in case the current ones are faulty.
What to do if Insignia NS-28E200NA14 LED TV has dark or no picture but sound is good?
To fix a dark, poor, or absent picture (while the screen is lit and sound is good) on your Insignia LED TV, try changing the channel to rule out station issues. Ensure your antenna or cable TV is securely connected. Adjust the brightness and select the correct picture mode. If using an antenna, check the digital channel signal strength and adjust the antenna, or consider using a highly directional outdoor or set-top antenna with a built-in amplifier. Also, make sure the video cables are securely connected or try a new set of cables.
Why does my Insignia NS-28E200NA14 have no color or a dark picture?
If your Insignia LED TV displays no color, a dark picture, or incorrect colors, try changing the channel to rule out station problems. Adjust the color settings. Ensure the video cables are securely connected to your TV. Also, make sure the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why does my Insignia LED TV screen only show snow?
If your Insignia LED TV only shows snow (noise) on the screen, try changing channels to rule out station issues. Ensure the antenna or cable TV is connected correctly and securely. If you're using an antenna, the digital channel signal may be weak. Consider adjusting the antenna or using a highly directional outdoor or set-top antenna with a built-in amplifier.
General