Insignia NS-28ED200NA14 User Manual (English)

Other manuals for Insignia NS-28ED200NA14

User Guide78 pages

Specifications2 pages

Information Importante12 pages

Información Importante12 pages

Quick Setup Guide2 pages

Guide D'Installation Rapide2 pages

Guía De Instalación Rápida2 pages

Questions and Answers:

T
twrightAug 31, 2025
How to fix dark picture but good sound on Insignia TV DVD Combo?
- D
  Danielle JohnsonAug 31, 2025
  If your Insignia TV DVD Combo has a dark, poor, or no picture (but the screen is lit) and the sound is good, try another channel as the station may be experiencing problems. Make sure that the antenna or cable TV is connected correctly and securely. Adjust the brightness and ensure that the correct picture mode is selected. If you are using an antenna, the digital channel signal may be low, so check the digital channel signal strength. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Ensure the video cables are connected securely. The video cables you are using may be bad, so try a new set.
K
Kenneth HumphreyAug 29, 2025
Why is there no picture and sound on my Insignia NS-28ED200NA14?
- R
  Rita CarrAug 30, 2025
  If your Insignia TV DVD Combo has no picture (screen is not lit) and no sound, press the power button on the TV or remote control. Make sure that the Audio Only option is set to Off. Ensure the video cables are securely connected. Adjust the contrast and brightness. Confirm that the power adapter is plugged in. Verify the correct video input source is selected. Try another channel, as the station may be experiencing problems. Ensure the incoming signal is compatible. Check that the antenna or cable TV is connected correctly and securely. Check the closed caption settings, as some TEXT modes can block the screen.
A
Alyssa ContrerasAug 28, 2025
How to improve color on Insignia NS-28ED200NA14 TV DVD Combo with good sound?
- L
  lukespencerAug 28, 2025
  If your Insignia TV DVD Combo has good sound but poor color, try adjusting the contrast, color, and brightness settings to improve the picture quality.
A
April MaciasAug 27, 2025
What to do if Insignia NS-28ED200NA14 TV DVD Combo says no signal?
- L
  Lori RamirezAug 27, 2025
  If your Insignia TV DVD Combo displays a “No signal” error message, press the INPUT button and ensure you have selected the correct input for the device or service you are trying to use. If you are using a cable or satellite box, use its remote to change channels and ensure you have selected the correct input to view channels from that box.
C
Crystal HuertaAug 27, 2025
Why Insignia NS-28ED200NA14 TV DVD Combo has no power?
- J
  John CruzAug 27, 2025
  If your Insignia TV DVD Combo has no power, ensure the power adapter is correctly connected to both the TV and a working power outlet. Try unplugging the power adapter, waiting 60 seconds, and then plugging it back in. Also, other devices (like surround sound receivers or fans) might be interfering with your TV, so try turning them off one by one to see if that resolves the issue. Move any interfering devices further away from the TV.
D
Donna DicksonAug 25, 2025
How to fix good picture but no sound on Insignia NS-28ED200NA14 TV DVD Combo?
- C
  christopherdayAug 26, 2025
  If you have good picture but no sound on your Insignia TV DVD Combo, first increase the volume and make sure that the sound is not muted. Ensure headphones are not connected, as this will disable the TV speakers. Verify that the correct audio mode is selected and that the audio cables are securely connected to your TV. Also, ensure your antenna or cable TV is properly connected. If using an antenna, check the digital channel signal strength. A bad audio cable can also cause this issue, so try a new set.
M
Maria MitchellAug 25, 2025
How to fix Insignia TV DVD Combo remote control not working?
- M
  Michael MacdonaldAug 25, 2025
  If the Insignia TV DVD Combo remote control isn't working, ensure the power cord is correctly connected to both the TV and the power outlet. Verify there are no obstructions between the remote and the sensor on the front of the TV, and that you're pointing the remote directly at the sensor. Also, check that the batteries are correctly installed and replace them with new ones if necessary.