60
Insignia 29" LED TV
www.insigniaproducts.com
Checking the digital signal strength
You can check the digital signal strength to determine
if you need to adjust your antenna or digital cable
input. The higher the signal strength, the less likely
you are to experience picture degradation.
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight CHANNELS, then press T
or ENTER. The CHANNELS menu opens.
3 Press
S or T to highlight Channel Strength, then
press ENTER. The Channel Strength screen opens
showing the signal strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Setting parental controls
Parental controls let you prevent your children from
watching inappropriate material on TV. When set,
parental controls read the rating of the program (with
some exceptions, such as news and sports) and deny
access to programs that exceed the ratings level you
select. To watch programs that exceed the selected
rating, you must enter a password.
Setting or changing the password
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press T
or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight Parental Controls, then
press ENTER. The Enter password screen opens.
4 Press the number buttons to enter the four-digit
password. The default password is 0000. You
should change the password to a number you can
remember. The SETTINGS · PARENTAL CONTROLS
menu opens.
To Next Page
Loading...
