How to fix Insignia LED TV remote control when it does not work?
First, ensure that the power cord is correctly connected to your TV and a power outlet. Check for obstructions between the remote and the TV's sensor. Point the remote directly at the sensor. Also, make sure you've removed any plastic wrapping from the batteries and that the batteries are correctly installed. If problems persist, replace the batteries with new ones.
Why is there no power on my Insignia NS-32D200NA14 LED TV?
First, ensure the power cord is properly connected to both your TV and the power outlet. If that doesn't work, try unplugging the power cord, waiting 60 seconds, and then plugging it back in before turning on your TV. Also, interference from other devices (such as surround sound receivers, external speakers, fans, or hair dryers) may cause the issue. Try turning off these devices one by one to see if any of them are the source of the problem.
What to do if my Insignia NS-32D200NA14 LED TV has good picture, but no sound?
First, increase the volume and make sure that the sound is not muted. Ensure headphones are not connected, as this will prevent sound from coming from the TV speakers. Also, verify that the correct audio mode is selected and that the audio cables are securely connected to your TV. If you are using an antenna, the digital channel signal may be low. Also, the audio cable(s) you are using may be bad. Try a new set.
What to do if my Insignia NS-32D200NA14 LED TV displays a “No signal” error message?
Press the INPUT button and ensure that you've selected the correct input for the device you are trying to use. If you're using a cable or satellite box, use its remote to change channels and ensure the correct input is selected to view channels from the box.
What to do if my Insignia NS-32D200NA14 LED TV has dark, poor, or no picture (screen is lit), but sound is good?
Try changing to another channel as the station may be experiencing problems. Make sure the antenna or cable TV is securely connected. Adjust the brightness and ensure that the correct picture mode is selected. If you're using an antenna, the digital channel signal may be low. Also, make sure that the video cables are connected securely to your TV or try using a new set of video cables.
Why is my Insignia NS-32D200NA14 LED TV not displaying the video or playing the audio from the connected mobile device?
Ensure all cables are securely connected and that you are using an MHL cable, which may look like a micro USB-to-HDMI cable but is thinner. Try adjusting the picture settings on your TV. Note that some apps may not work on your TV, depending on how the app developer programmed them.
Why is my Insignia LED TV playing the audio from a connected device but is not displaying the video?
Ensure that all cables are securely connected and that you are using an MHL cable, which may look like a micro USB-to-HDMI cable but is thinner. Try adjusting the picture settings on your TV. Note that some apps may not work on your TV, depending on how the app developer programmed them.
Why is my Insignia LED TV displaying the video from the connected device but is not playing the audio?
Make sure that the volume on your mobile device and your TV is turned up and not muted. Ensure that all cables are securely connected and that you are using an MHL cable, which may look like a micro USB-to-HDMI cable but is thinner. Try adjusting the audio settings on your TV. Note that some apps may not work on your TV, depending on how the app developer programmed them.
What to do if my Insignia NS-32D200NA14 shows only snow (noise) on the screen?
Try switching to another channel as the station may be experiencing problems. Make sure the antenna or cable TV is correctly and securely connected. If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
How to fix Insignia NS-32D200NA14 LED TV when the picture does not fill the screen?
Change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9).
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| Resolution | 720p |
| Refresh Rate | 60Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Smart TV | No |
| Inputs | Composite |
| Weight | 10.1 lbs |
How to attach the TV stand.
How to connect cable/satellite boxes using various methods.
Connecting direct antenna or cable without a box.
Connecting DVD or Blu-ray players via different methods.
Connecting MHL devices like phones for screen mirroring.
Connecting game consoles using HDMI or component video.
How to power the TV on and off.
How to choose the active video input.
Adjusting picture quality settings like mode, brightness, etc.
Adjusting sound quality settings.
Setting or modifying the parental control password.
Blocking programs without ratings using parental controls.
Enabling or disabling HDMI CEC control.
Displaying MHL device content on TV.
Resetting all TV settings to factory defaults.
Common video and audio issues and solutions.
Solutions for remote control and programming problems.
Resolving no power, no signal, and channel scan problems.
To Next Page