M
mgraySep 4, 2025
How to remove black bars on Insignia NS-32D420NA16?
- BBrittany DavisSep 4, 2025
If the picture on your Insignia TV does not fill the screen and there are black bars around it, press the ASPECT button to change the aspect ratio.
To Next PageTo Next PageHow to remove black bars on Insignia NS-32D420NA16?
If the picture on your Insignia TV does not fill the screen and there are black bars around it, press the ASPECT button to change the aspect ratio.
How to improve color on Insignia NS-32D420NA16 TV?
If your Insignia TV has good sound but poor color, adjust the contrast, color, and brightness settings.
Why is picture quality bad on some Insignia NS-32D420NA16 channels?
If your Insignia TV shows good picture quality on some channels but poor quality on others while the sound remains good, the problem may be a weak signal. If you connect to cable without a set-top box, consider installing one to improve signal reception. Contact your cable TV provider for details.
How to fix dotted lines on Insignia NS-32D420NA16 screen?
If dotted lines or stripes appear on your Insignia TV screen, make sure that the antenna or cable TV is connected correctly and securely. The digital channel signal may be low. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Make sure that the video cables are connected correctly and securely to your TV. The video cable(s) you are using may be bad. Try a new set. Other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
Why won't my Insignia TV display video from a CEC device?
If your Insignia TV isn't displaying video from a connected CEC device, ensure the HDMI cable is securely connected to both the TV and the device. Verify the device is connected via HDMI and is indeed a CEC device. Press the INPUT button and select the appropriate video input source. Also, confirm that the INlink feature is enabled. If the connected device is not an Insignia product, compatibility issues may exist.
Why can't I select my device on Insignia TV input menu?
If you cannot select your device when you press INPUT on your Insignia TV (it is grayed out), turn on the device. Your TV automatically detects and displays which video jacks have devices connected to them when the devices are turned on. Alternatively, turn off Auto Input Sensing.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LED |
| Refresh Rate | 60Hz |
| Smart TV | No |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Backlight Type | LED |
| Inputs | HDMI, USB, Composite |
| Resolution | 720p (HD) |
| Audio Output | 10W x 2 |
