Why does the Audio Receiver setting on my Insignia NS-39D400NA14 TV INlink menu keep turning back on?
When the Audio Receiver setting on your Insignia TV's INlink menu keeps turning back on after you turn it off, it's because when Audio Receiver is set to Off and INlink Control is set to On, any adjustment to the audio receiver automatically turns Audio Receiver back on. To prevent this, turn off the INlink feature.
Why can't I access some settings on my Insignia NS-39D400NA14?
If some settings on your Insignia TV cannot be accessed and are grayed out, it means that the setting is not available in the current video input mode.
Why is my device not showing up in the INlink Device list on my Insignia NS-39D400NA14 TV?
If a device is not showing up in the INlink Device list on your Insignia TV, make sure that the device is turned on and that the HDMI cable is securely connected to both the TV and the device. Also, ensure that the INlink feature is turned on and that the device is a CEC device. If the device is not an Insignia device, it may not be compatible with your TV.
Why doesn't my device turn off when I turn off my Insignia NS-39D400NA14 TV?
If your device does not turn off when you turn off your Insignia TV, make sure that the INlink feature is turned on and that Device Auto Power Off is set to On in the INlink menu. Note that the device may not support this feature.
Why doesn't my Insignia TV turn on when I turn on my device?
If your Insignia TV does not turn on when you turn on your device, ensure that the INlink feature is turned on and that TV Auto Power On is set to On in the INlink menu. The device may not support this feature.
How to remove retail banner from Insignia NS-39D400NA14?
If a retail banner is displayed on your Insignia TV, you likely selected “Retail Mode” during the TV setup. Reset your TV to the factory defaults, then select Home Use Mode on the “What is your viewing environment” screen.
How to prevent after images on Insignia NS-39D400NA14?
To prevent after images from appearing on your Insignia TV, avoid displaying still images like logos, games, or computer images for extended periods. This can cause permanent after-image burn-in, which is not covered by your warranty.
How to remove black bars on Insignia NS-39D400NA14 screen?
If the picture on your Insignia TV does not fill the screen and there are black bars around it, change the aspect ratio. Digital TV and movies are often presented in widescreen (16:9).
What to do if my Insignia TV has no picture and sound?
If your Insignia TV has no picture (screen unlit) and no sound, try the following: First, press the power button on the TV or remote. Check that the Audio Only option is set to Off. Ensure the video cables are securely connected. Adjust the contrast and brightness. Verify the power cord is plugged in. Select the correct video input source. Try another channel as the station might have issues. Ensure the incoming signal is compatible. Check the antenna or cable TV connection. Finally, check the closed caption settings, as some TEXT modes can block the screen.
Why does my Insignia NS-39D400NA14 have picture but no sound?
If your Insignia TV has a good picture but no sound, first increase the volume and make sure that the sound is not muted. Ensure that headphones are not connected, as this will prevent sound from coming from the TV speakers. Check that the correct audio mode is selected and that the audio cables are securely connected. Also, ensure the antenna or cable TV is connected correctly. If you are using an antenna, check the digital channel signal strength. The audio cables you are using may be faulty, try a new set.
General| Screen Size | 39 inches |
|---|---|
| Display Type | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Smart TV | No |
| Built-in Wi-Fi | No |
| Audio Output | 10W |
| Resolution | 1366 x 768 |
| Backlight Type | LED |
| Inputs | HDMI, USB, Composite, RF |
| Weight | 15.4 lbs |
Reduces risk of fire or electric shock by not removing covers or exposing device to rain/moisture.
Protection for device receiver during lightning storms or when unused.
Conditions under which to unplug TV and refer servicing to qualified personnel.
Step-by-step instructions for attaching the TV stand to the TV base.
States TV requires UL Listed wall mount with suitable weight/load for support.
Steps for removing the stand and attaching a wall-mount bracket to the TV.
Explains the function of each button on the remote control.
Steps to connect MHL devices, like phones or sticks, to the TV's HDMI 2/MHL jack.
Connects computer to TV using VGA cable for video and audio.
Connects computer to TV via HDMI for high-quality video and audio.
Connects home theater system using digital optical audio cable for TV audio.
Instructions for connecting the TV's AC power cord to the TV and a power outlet.
Steps for inserting AAA batteries into the remote control.
Guides through initial setup: language, time, picture mode, TV source, channels.
Adjusts time zone and daylight saving settings for accurate time display.
Instructions for powering the TV on, off, and into standby mode.
Details how to adjust picture mode, backlight, brightness, contrast, color, and tint.
Fine-tunes sound quality by adjusting sound mode, balance, bass, and treble.
Scans for and stores available TV channels in the channel list.
Guides on setting or modifying the 4-digit parental control password.
Locks TV buttons, allowing operation only via remote control.
Blocks TV programs without ratings, requiring password entry.
Explains U.S. TV and movie rating systems for content filtering.
Explains Canadian English and French rating systems for content filtering.
Enables/disables HDMI CEC control for connected devices.
Connects MHL devices to view their screen on the TV.
Connects a Roku Streaming Stick to the TV for streaming content.
Resets all customized settings, including parental controls, to factory defaults.
Provides solutions for common video and audio problems.
Troubleshoots problems like dark/poor picture, no picture, or incorrect color.
Troubleshoots issues like no sound, poor sound, or audio noise.
Troubleshoots screen display issues like lines, double images, or spots.
Addresses issues with the remote control not working or programming.
Solves problems related to no power or 'No signal' error messages.
Troubleshoots issues with MHL device charging, video, or audio playback.
Troubleshoots problems with Roku Streaming Stick display or control.
Troubleshoots issues with INlink device display, control, and power management.
Addresses issues with INlink device not showing up, turning off, or turning on with TV.
Provides common codes for programming universal remotes to control the TV.
To Next Page
