To Next PageTo Next Page
How do I get rid of black bars on my Insignia NS-39D40SNA14 screen?
To remove black bars around the picture on your Insignia TV, change the aspect ratio. Digital TV and movies are increasingly presented in widescreen (16:9). You can find the Aspect Ratio option in the “Adjusting the TV picture” settings.
Why does my Insignia NS-39D40SNA14 only show snow (noise) on the screen?
If your Insignia TV screen only displays snow (noise), here are some things you can try: * Try another channel to rule out station problems. * Ensure the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength. * If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why does my Insignia NS-39D40SNA14 show two volume bars when I adjust the volume?
When you adjust the volume on the audio receiver or with the TV remote control, a double volume bar appears, one for the TV volume and one for the audio receiver volume.
General| Screen Size | 39 inches |
|---|---|
| Display Type | LED |
| Refresh Rate | 60 Hz |
| Smart TV | No |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Backlight Type | LED |
| Inputs | HDMI, USB, Composite |
