31
Insignia 39" LED TV
www.insigniaproducts.com
Connecting a basic home theater system
Using digital audio
To connect a basic home theater system using digital audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a digital coaxial audio cable (not provided) to the COAXIAL jack on the back of your TV and to the
coaxial AUDIO IN jack on the digital home theater system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
5 On your TV, set the Digital Audio/SPDIF option on the AUDIO menu to PCM. See “Adjusting sound settings” on
page 43.
Digital coaxial audio cable
Home theater system
Back of TV
Digital coaxial
audio cable
connector
COAXIAL jack
On your TV
To Next Page
Loading...
