17
39" 1080p, 60Hz, LED Roku TV
www.insigniaproducts.com
Coaxial (good)
1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Set up the TV tuner to watch broadcast TV. See Setting up Antenna TV on page 41.
6 On the Home screen, press or to highlight the Antenna TV tile, then press OK.
Notes
•Use a coaxial cable to eliminate interference and noise from radio
waves.
•Do not bundle the coaxial cable with the power cord or other cables.
To Next Page
Loading...
