R
Rachel BurnettSep 7, 2025
How do I fix poor color when the sound is good on my Insignia NS-39E400NA14 LED TV?
- PpcamachoSep 7, 2025
To resolve this, adjust the contrast, color, and brightness settings on your Insignia LED TV.
To Next PageTo Next Page
How do I fix poor color when the sound is good on my Insignia NS-39E400NA14 LED TV?
To resolve this, adjust the contrast, color, and brightness settings on your Insignia LED TV.
What to do if the remote control does not work on Insignia LED TV?
First, ensure the power cord is correctly connected to your Insignia LED TV and a power outlet. Then, make sure there are no obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor, verify the batteries are correctly installed, and replace dead batteries with new ones.
Why is there no color on my Insignia NS-39E400NA14 LED TV?
First, try another channel to rule out station issues. Then, adjust the color settings of your Insignia LED TV. Also, make sure that the video cables are connected correctly and securely to your TV, and that the antenna or cable TV is connected correctly and securely.
How do I improve poor picture quality on Insignia NS-39E400NA14?
To resolve a poor picture on your Insignia LED TV, make sure the room is not too bright, as light reflecting off the screen can make the picture difficult to see. If you have an S-VHS camera or camcorder connected while another device is on, it may cause a poor picture. Try turning off one or more devices.
How to fix no power on Insignia LED TV?
First, make sure the power cord is correctly connected to both your Insignia LED TV and the power outlet. If it's connected, unplug the power cord, wait for about 60 seconds, then plug it back in and turn your TV on. Also, other devices like external speakers or fans might be interfering with your TV; try turning them off one by one to see if that resolves the issue.
What to do if my Insignia NS-39E400NA14 LED TV says no signal?
First, press the INPUT button on your Insignia LED TV or remote and ensure you've selected the correct input for the device or service you're trying to use. If you're using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input on your TV to view channels from the box.
How to stop audio noise on Insignia NS-39E400NA14 LED TV?
To fix audio noise on your Insignia LED TV, other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
How to fix dotted lines on Insignia NS-39E400NA14 screen?
To address dotted lines or stripes, first ensure the antenna or cable TV is securely connected to your Insignia LED TV. If using an antenna, a weak digital channel signal may be the cause; consider adjusting the antenna or using a high-directional outdoor antenna. Also, make sure the video cables are securely connected and try replacing them if they might be faulty. Other devices might be interfering with your TV, so try turning them off one at a time to identify and move the source of the interference further away.
How to fix black bars on Insignia NS-39E400NA14 screen?
To resolve this, change the aspect ratio on your Insignia LED TV. Digital TV and movies are increasingly presented in wide screen (16:9).
Why is there no picture or sound on my Insignia NS-39E400NA14 LED TV?
To resolve this, press the power button on the TV or the remote control. Make sure that the Audio Only option is set to Off. Also, make sure that the video cables are connected securely to your Insignia LED TV. Adjust the contrast and brightness. Make sure that the power cord is plugged in. Make sure that the correct video input source is selected.
General