Why does my Insignia NS-39E400NA14 only show snow?
Make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, try another channel, as the station may be experiencing problems.
What to do if my Insignia NS-39E400NA14 LED TV says no signal?
First, press the INPUT button on your Insignia LED TV or remote and ensure you've selected the correct input for the device or service you're trying to use. If you're using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input on your TV to view channels from the box.
How to fix no power on Insignia LED TV?
First, make sure the power cord is correctly connected to both your Insignia LED TV and the power outlet. If it's connected, unplug the power cord, wait for about 60 seconds, then plug it back in and turn your TV on. Also, other devices like external speakers or fans might be interfering with your TV; try turning them off one by one to see if that resolves the issue.
How do I improve poor picture quality on Insignia NS-39E400NA14?
To resolve a poor picture on your Insignia LED TV, make sure the room is not too bright, as light reflecting off the screen can make the picture difficult to see. If you have an S-VHS camera or camcorder connected while another device is on, it may cause a poor picture. Try turning off one or more devices.
Why is there no color on my Insignia NS-39E400NA14 LED TV?
First, try another channel to rule out station issues. Then, adjust the color settings of your Insignia LED TV. Also, make sure that the video cables are connected correctly and securely to your TV, and that the antenna or cable TV is connected correctly and securely.
Why is my Insignia NS-39E400NA14 remote control not working?
First, ensure that the power cord is correctly connected to both your Insignia LED TV and the power outlet. Also, ensure that there are no obstructions between the remote and the remote control sensor on the front of the TV. Then, point the remote directly at the sensor. Verify that you've removed all plastic wrapping from the batteries and that the batteries are correctly installed. If the remote still isn’t working, replace the batteries with new ones.
Why is my mobile device not charging when connected to the HDMI port on my Insignia LED TV?
To Next Page
General