Why does my Insignia NS-39L700A12 TV cabinet creak?
When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.
How to fix no sound on my Insignia NS-39L700A12 but the picture is fine?
If your Insignia TV has a good picture but no sound, here are a few things to check: - Increase the volume. - Make sure the TV is not muted. - Verify that the correct audio mode is selected. - Ensure the audio cables are correctly and securely connected to the back of your TV. - Check that the antenna or cable TV is connected correctly and securely. - If you're using an antenna, the digital channel signal may be low. - The audio cables you are using may be faulty, try a new set.
What to do if my Insignia TV screen only shows snow or noise?
If your Insignia TV screen only displays snow or noise, try these steps: - Try switching to another channel to rule out a broadcast issue. - Ensure the antenna or cable TV is correctly and securely connected. - If using an antenna, the digital channel signal may be weak. Adjust the antenna or consider using a highly directional outdoor antenna or a set-top antenna with a built-in amplifier.
Why does my Insignia NS-39L700A12 keep turning off by itself?
If your Insignia TV keeps turning off, make sure that the sleep timer is not turned on.
What to do if my Insignia TV remote control does not work?
If your Insignia TV remote isn't working, ensure the power cord is correctly connected to the TV and outlet. Remove any obstructions between the remote and the sensor on the TV's front. Point the remote directly at the sensor. Make sure you've removed the clear plastic wrapping from the batteries, that the batteries are installed correctly, and replace dead batteries with new ones.
How do I fix double images on my Insignia TV?
To resolve double images on your Insignia TV, use a highly directional outdoor antenna, cable TV, or satellite TV.
How do I fix the color on my Insignia NS-39L700A12?
If your Insignia TV has no color, a dark picture, or the color is not correct, try the following: - Try another channel to rule out issues with the broadcast. - Adjust the color saturation. - Make sure the video cables are connected correctly and securely to the back of your TV. - Ensure that the antenna or cable TV is connected correctly and securely. - If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why is the picture quality on my Insignia TV good on some channels but poor on others?
The problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality.
Why does my Insignia TV only show snow (noise) on the screen?
If your Insignia TV screen only displays snow (noise), try changing to another channel as the station may be experiencing problems. Ensure that the antenna or cable TV is connected correctly and securely. If you're using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why is my Insignia NS-39L700A12 picture dark, poor, or has no picture but the sound is good?
If your Insignia TV screen is lit but the picture is dark, poor, or nonexistent while the sound is good, try switching to another channel as the station may be experiencing problems. Ensure the antenna or cable TV is securely connected. Adjust the brightness and make sure the correct picture mode is selected. If using an antenna, a low digital channel signal may be the cause; adjust the antenna or use a high-directional outdoor or set-top antenna with a built-in amplifier. Also, make sure the video cables are securely connected and try a new set of video cables if the current ones may be faulty.
To Next Page
General