How to fix Insignia TV remote control that is not working?
If your Insignia TV remote isn't working, ensure the power cord is correctly connected, remove any obstructions between the remote and the TV sensor, and point the remote directly at the sensor. Also, verify that the plastic wrapping is removed from the batteries, the batteries are correctly installed, or try replacing them with new ones.
What to do if my Insignia TV says no signal?
If your Insignia TV displays a 'No signal' error message, press the INPUT button to select the correct input for your device or service. If using a cable or satellite box, use its remote to change channels and ensure the correct input is selected for viewing those channels.
Why is there good picture but no sound on my Insignia NS-46E440NA14?
If you have good picture but no sound on your Insignia TV, first, increase the volume and make sure the sound isn't muted. Check if headphones are connected, as they disable the TV speakers. Ensure the correct audio mode is selected and that the audio cables are securely connected. If using an antenna, a weak digital signal could be the cause. Also, try a new set of audio cables, as the ones you're using might be faulty.
What to do if my Insignia NS-46E440NA14 has no picture and no sound?
If your Insignia TV has no picture and no sound, first, press the power button on the TV or remote. Ensure the 'Audio Only' option is set to Off. Check that the video cables are securely connected, and adjust the contrast and brightness. Make sure the power cord is plugged in, the correct video input source is selected, and try another channel. Verify that the incoming signal is compatible and that the antenna or cable TV is connected correctly. Also, check the closed caption settings, as some TEXT modes can block the screen.
Why my Insignia NS-46E440NA14 TV has no power?
If your Insignia TV has no power, ensure the power cord is correctly connected to a power outlet. Unplug the power cord, wait 60 seconds, then plug it back in and turn on the TV. Other devices may be interfering with your TV, so try turning them off one at a time to identify the source of interference and move it further away from the TV.
Why is my Insignia TV playing audio but not displaying video from a connected device?
If your Insignia TV is playing audio from a connected device but not displaying video, ensure the cables are securely connected and that you are using an MHL cable. Try adjusting the picture settings on your TV. Some apps may not work on your TV, depending on how the app developer programmed the app.
Why is my Insignia TV not displaying video or playing audio from the connected mobile device?
If your Insignia TV is not displaying video or playing audio from a connected mobile device, ensure the cables are securely connected and that you are using an MHL cable. Try adjusting the picture settings on your TV. Some apps may not work on your TV, depending on how the app developer programmed the app.
Why is there dark picture but sound is good on my Insignia NS-46E440NA14?
If your Insignia TV has a dark, poor, or no picture (screen is lit) but the sound is good, try another channel. Ensure the antenna or cable TV is connected correctly and securely. Adjust the brightness and make sure the correct picture mode is selected. If using an antenna, the digital channel signal may be low; check the digital channel signal strength. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Make sure the video cables are securely connected and try a new set of video cables.
Why does my Insignia TV have no color or a dark picture?
If your Insignia TV has no color, a dark picture, or incorrect color, try another channel. Adjust the color settings. Make sure the video cables are connected correctly and securely to your TV. Ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why doesn't my Insignia TV’s remote control control the device?
If your Insignia TV’s remote control does not control the device, ensure there are no obstructions between the remote and the remote control sensors on your TV and the device. If the device is not an Insignia device, all the buttons may not work. Ensure the INlink feature is turned on. If you are trying to control the volume on an HDMI CEC audio receiver using your TV remote control, make sure that the TV Speakers option on the Audio menu is set to On and that the Audio Receiver option on the INlink menu is set to On. The device may not support this feature.
To Next Page
General