Insignia NS-46E790A12

Other manuals for Insignia NS-46E790A12

Guía Del Usuario64 pages

Quick Setup Guide2 pages

Important Information12 pages

Information Importante12 pages

Información Importante12 pages

Guía De Instalación Rápida2 pages

Guide D'Installation Rapide2 pages

Guide De L'Utilisateur64 pages

Questions and Answers:

D
Dominique AlexanderSep 1, 2025
What to do if my Insignia NS-46E790A12 has a dark picture but good sound?
- H
  Haley BakerSep 1, 2025
  If your Insignia TV screen is lit but the picture is dark, poor, or nonexistent while the sound is fine, consider these potential solutions: * Try switching to another channel to rule out station-specific issues. * Ensure that your antenna or cable TV connection is secure and correct. * Adjust the brightness settings on your TV. * Select the correct picture mode. * If you're using an antenna, the digital channel signal might be weak. * If the signal strength is low, try adjusting the antenna or using a more powerful antenna with a built-in amplifier. * Make sure the video cables are connected securely to your TV. * The video cables you are using may be bad. Try a new set.
S
sheena99Aug 31, 2025
How to fix Insignia TV if there is no color or the picture is dark?
- B
  brandonhayesAug 31, 2025
  If your Insignia TV displays no color, a dark picture, or incorrect colors, try switching to another channel as the broadcast station might be experiencing issues. Adjust the color settings in the TV menu. Ensure that the video cables are correctly and securely connected to your TV. Also, verify that the antenna or cable TV connection is secure. If using an antenna, check the digital channel signal strength and adjust the antenna or use a more powerful one if the signal is weak.
M
Megan RangelAug 30, 2025
Why does my Insignia NS-46E790A12 TV have a dark or poor picture, but the sound is good?
- A
  Andrew LeeAug 30, 2025
  If your Insignia TV has a dark, poor, or no picture but the sound is good, try the following: try another channel to rule out station issues. Also, make sure that the antenna or cable TV is connected correctly and securely. Adjust the brightness and ensure that the correct picture mode is selected. If you're using an antenna, check the digital channel signal strength. Make sure the video cables are securely connected to your TV and if the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. The video cables you are using may be bad, so try a new set.
M
millermatthewAug 29, 2025
How to fix an Insignia TV with good picture but no sound?
- C
  Craig PollardAug 29, 2025
  If your Insignia TV has a good picture but no sound, start by increasing the volume and making sure that the sound is not muted. Check that the correct audio mode is selected and that headphones are disconnected. Ensure the audio cables are securely connected to the back of your TV. Also, confirm that the antenna or cable TV is properly connected. If you are using an antenna, check the digital channel signal strength. The audio cables you are using may be faulty, so try a new set.
M
Mr. Paul MillerAug 28, 2025
How to fix an Insignia NS-46E790A12 TV remote that is not working?
- T
  Thomas MendozaAug 28, 2025
  If the remote control for your Insignia TV isn't working, consider these potential solutions: * Ensure the TV's power cord is properly connected to both the TV and a working power outlet. * Remove any obstructions between the remote and the TV's remote control sensor. * Point the remote directly at the remote control sensor on the front of the TV. * Verify that the batteries are correctly installed in the remote. * Replace the old batteries with new ones.
M
Michael JonesAug 27, 2025
Why is there sound missing on my Insignia NS-46E790A12 TV?
- R
  Renee MckinneyAug 27, 2025
  If your Insignia TV has good picture but no sound, here are some things to check: * Increase the volume and make sure the sound isn't muted. * Ensure the correct audio mode is selected. * Verify the audio cables are securely connected to your TV. * Make sure that the antenna or cable TV is connected correctly and securely. * If using an antenna, the digital channel signal may be low. * The audio cables you are using may be bad. Try a new set.
L
Laura LeeAug 26, 2025
Why does my Insignia NS-46E790A12 have no picture and sound?
- M
  Martin RoseAug 26, 2025
  If your Insignia TV shows no picture and no sound, try the following: * Ensure the power cord is plugged in. * Press the power button on the TV or remote. * Check that the video cables are securely connected. * Select the correct video input source. * Try another channel to rule out station issues. * Confirm the incoming signal is compatible. * Verify the antenna or cable TV is properly connected. * Adjust the contrast and brightness settings. * Ensure the 'Audio Only' option is off. * Check the closed caption settings in case TEXT modes are blocking the screen.
M
michael50Aug 25, 2025
What to do if my Insignia NS-46E790A12 has no power?
- R
  Richard CisnerosAug 26, 2025
  If your Insignia TV has no power, ensure the power cord is correctly connected to both the TV and the power outlet. Try unplugging the power cord, waiting 60 seconds, and then plugging it back in before turning on the TV. Other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
S
susan67Aug 25, 2025
What to do if my Insignia NS-46E790A12 TV has no picture and no sound?
- D
  Debbie SparksAug 25, 2025
  If your Insignia TV has no picture and no sound, there are several things to check. First, press on the TV or the remote control. Make sure the power cord is plugged in and that the correct video input source is selected. Ensure that the video cables are connected securely to your TV and that the incoming signal is compatible. Try another channel to rule out station problems. Also, verify that the Audio Only option is set to Off and adjust the contrast and brightness. Finally, make sure the antenna or cable TV is connected correctly and securely and check the closed caption settings as some TEXT modes can block the screen.