3.2 Adjustment flow as Fig. 1:
图 1 调校流程
Fig. 1 Adjustment flow chart
Check if DDC、FLASH has been written?
Produce data processing board on line.
General assembly and combined adjustment (check if power
White balance adjustment
Input central signal, check TV function (omitted channel, analog
parameters control, etc. ), check earphone, speakers output.
Input HDMI signal (mode), check YPbPr functions.
Input VGA signal, check display and all functions (such as analog
parameter), H/V center, etc..
Default settings before shipment
Check accessory and packing
Input AV / S V IDEO signal, check relevant functions.
Input HDMI signal, check display and all functions (such as
analog parameter), H/V center, etc..
Aligment Instructions
To Next Page
Loading...
Need help?
General