29
Insignia 50" LED TV
www.insigniaproducts.com
Using analog audio
When you connect a home theater system to the AUDIO OUT/ jack, the TV speakers are muted.
To connect a home theater system or sound bar using analog audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a 3.5mm audio cable (not provided) to the AUDIO OUT/ jack on the side of your TV and to the
AUDIO IN jacks on the analog home theater system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the home theater system.
Notes
• For information about selecting the audio out mode for a home theater
or sound bar, see the Headphone/Audio Out option in “Adjusting
sound settings” on page 40.
• If you want to use headphones, you need to disconnect the home
theater system or sound bar.
3.5mm audio cable
Home theater
system
Side of TV
3.5mm audio
cable connector
AUDIO OUT/
jack
On your TV
To Next Page
Loading...
