Insignia NS-B2114 - Setting Up Your Boombox; Connecting the DC Power Cord; Installing Batteries

13
Insignia NS-B2114 CD Boombox with AM/FM Radio
www.insignia-products.com
Connecting the DC power cord
You can use the DC power cord (not included) to connect your
boombox to an automobile cigarette lighter or power outlet.
To connect the DC power cord:
1 Plug the power cord into the DC IN jack on the back of your
boombox.
2 Plug the other end of the power cord into an automobile cigarette
lighter or power outlet.
Installing batteries
To install batteries:
1 Make sure that power cord is unplugged.
2 Remove the battery compartment cover.
To D C 1 2 V J ac k