Insignia NS-BCDCAS1 User Manual

11
Insignia NS-BCDCAS1 Boombox with Cassette/CD/ AM/FM Radio
www.insigniaproducts.com
Installing the batteries
To install the batteries:
1 Turn your boombox over, then open and remove the door to the
battery compartment.
2 Insert six (6) “D” size batteries into the battery compartment.
Make sure that you match the + and – symbols on the batteries
with the + and – symbols in the battery compartment.
3 Reinstall and close the battery compartment door and return your
boombox to the upright position.
Note
Only use the supplied AC power adapter, which has the
following specifications: DC=12V 1.25A
Unplug both the DC plug and the adapter when not in use.
The batteries are automatically bypassed when the AC
power adapter is used.
- Power Adapter Electrical Specs: 100-240 V ~ 50-60 Hz,
0.7A
- Device Electrical Specs: 12 VDC, 1.25 A
Note
The AC power adapter must be disconnected from the
DC IN jack on the back of your boombox in order for your
boombox to operate on battery power.
Caution
Follow these precautions when using batteries in this
device:
- Use only the size and type of batteries specified.
- Make sure that you follow the correct polarity as indicated
in the battery compartment when installing batteries.
Reversed batteries may cause damage to your boombox.
- Do not mix different types of batteries together (for
example, alkaline, rechargeable, and carbon zinc), or
semi-used batteries with fresh ones.
- If your boombox is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
- Do not try to recharge batteries not intended to be
recharged, because they can overheat and rupture.
(Follow battery manufacturer’s directions.)
- Do not throw batteries into a fire. Dispose of used batteries
as hazardous waste.
NS-BCDCAS1_13-0709_MAN_V1-ENG.fm Page 11 Friday, August 9, 2013 7:01 AM

Insignia NS-BCDCAS1 Specifications

General

Brand	Insignia
Model	NS-BCDCAS1
Category	Portable Stereo System
Language	English