Insignia NS-BCDCAS1 User Manual

12
Insignia NS-BCDCAS1 Boombox with Cassette/CD/ AM/FM Radio
www.insigniaproducts.com
Connecting headphones
To connect headphones:
• Plug the headphones (not included) into the headphone jack
on the back of the unit.
Using your boombox
Playing the radio
To play the radio:
1 Press (Standby/ON) to turn on the boombox.
2 Press (source) repeatedly to select RADIO mode, then press
BAND to select AM or FM.
3 Press (next) or (previous) to tune the radio to a higher or
lower frequency.
Press and hold (next) or (previous) for two seconds to
automatically tune to the next or previous station.
4 Adjust the volume to a comfortable level by pressing either the
VOLUME + or VOLUME – button.
5 Press (Standby/ON) to turn off the boombox.
To improve reception:
• For FM reception, unwind and extended the FM antenna. You
may have to reposition the antenna for best reception. Do not
connect the FM antenna wire to an outside antenna.
• For AM reception, turn your boombox slightly until reception
improves.
• Move the boombox 3 feet away from the AC power adapter to
reduce interference to radio reception.
To use presets:
1 Press (Standby/ON) to turn on the boombox.
2 Press (source) repeatedly to select RADIO mode, then press
BAND to select AM or FM.
Caution
Listening to music with the volume too loud can damage
your hearing. Before you connect headphones, turn the
volume down. After you put on the headphones, gradually
increase the volume to a comfortable level.
NS-BCDCAS1_13-0709_MAN_V1-ENG.fm Page 12 Friday, August 9, 2013 7:01 AM

Insignia NS-BCDCAS1 Specifications

General

Brand	Insignia
Model	NS-BCDCAS1
Category	Portable Stereo System
Language	English