8
NS-CLOPP2
www.insigniaproducts.com
Set up your clock radio
Install the backup batteries
The clock radio uses a backup battery system to provide
continuous alarm operation and clock settings in the event of a
power failure. If the backup batteries have been installed and a
power failure occurs or the AC power adapter is accidentally
disconnected, the display will not remain lit, but the current time
and alarm time settings will be temporarily maintained.
Otherwise, you must reset the time and alarm settings.
Make sure that the AC power adapter is plugged in, otherwise all
settings may be lost during battery installation.
1 Turn your clock radio around to the back, then open the
battery compartment cover located on the right side of
your clock radio.
2 Insert two "AA" batteries into the battery compartment.
Make sure that the + and – symbols on the batteries
align with the + and – symbols inside the battery
compartment.
3 Close the battery compartment.
To Next Page
Loading...
