6
NS-DACMSFK AC Master/Slave Flash Kit
www.insigniaproducts.com
3 Place a light holder onto the top of a light stand, then tighten the light holder knob.
4 Screw the AC power plug on the bottom of a flash head into the power socket on the light holder.
Warning: Do not plug the power cord into a power outlet until you have completed the flash head assembly.
Touching the exposed power socket when the power cord is plugged into a power outlet can cause an electric
shock or fire.
NS-DACMSFK_14-1397_V3_MAN_ENG.book Page 6 Thursday, December 4, 2014 10:15 AM
To Next Page
Loading...
