EasyManua.ls Logo

Insignia NS-DPF0712G - Maintaining Your Device; Cleaning the Digital Picture Frame; Replacing the Remote Control Battery

Insignia NS-DPF0712G
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
NS- DPF0712G
www.insigniaproducts.com
Maintaining
Cleaning the digital picture frame
Make sure the frame is unplugged from the power source.
Use the supplied cleaning cloth, or a cloth slightly
dampened with water for cleaning the exterior of the frame
only.
Replacing the remote control battery
To replace the remote control battery:
1
Turn the remote control over.
2 While pressing down on the ridged area of the battery
cover, slide the battery tray out and remove the old
battery.
3 Place a new CR2025 (or equivalent) lithium battery in
the tray, with the positive (+) side facing up.
4 Slide the battery tray back into the remote control.

Other manuals for Insignia NS-DPF0712G

Related product manuals