Insignia NS-DPF10WA-09 - Maintaining the Digital Picture Frame; Cleaning the LCD Screen; Cleaning External Surfaces; Replacing Remote Control Battery

INSIGNIA
Menu
option
Settings
Description
Copy type
Normal
Maintains the
resolution while c Q p V i^ r,9ma
Resize
space in the internaCX
Power
saving
Off
15 Minutes
30 Minutes
1 Hour
2 Hours
6 Hours
Sets the power save option if
the buttons on the frame Jr '
remote control are not used for
the specified time, the frame
enters Power Saving
(Standby) mode.
To turn the frame back on
press any button on the frame
Language English
Spanish
French
Sets the language used in the
setup menus.
Factory
settings
Demo Mode
Reset All Settings
Erase Internal
Memory
Software Version
Displays pictures from internal
memory for demo purposes.
Resets ail settings to origin a
default settings.
Erase all files stored in interne
memory.
Displays the firmware version
istanta-
28
__INSIGNIA
Maintaining
Cleaning the LCD screen
Treat the LCD screen carefully. The screen is made of
glass and can be scratched or broken To clean
fingerprints or dust from the LCD screen, we recommend
using the cloth provided (or a soft, non-abrasive cloth
such as a camera lens doth) or an LCD cleaning kit.
Cleaning the digital picture frame
Clean the outer surface of the digital picture frame
(excluding the screen) with a soft doth dampened with
water.
Replacing the remote control battery
To replace the remote control battery:
1 Turn the remote control over.
2 White pressing down on the ridged area of the
battery cover, slide the battery tray out and remove
the old battery.
3 Place a new CR2025 (or equivalent) lithium battery
in the tray, with the positive (+) side facing up.
4 SlicJe the battery tray back into the remote control
29