Insignia NS-DSC7P-09 User Manual

8
Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-09 7 Megapixel Digital Camera
www.insignia-products.com
To change the LCD monitor configuration:
• Press SET/DISP repeatedly to change the
configuration.
• REC mode—
• PLAYBACK mode—
Using your camera
Basic operation
To turn your camera on and off:
1 Press Power to turn your camera on in
REC mode. The power turns on, the lens
extends, and the power indicator LED turns
green.
- OR -
Press Playback to turn your camera on in
PLAYBACK mode. The power turns on and
an image displays on the LCD .
2 Press Power again to turn your camera off.
The power turns off, the lens retracts, and the
power indicator LED turns off.
11 Voice memo
control
“Recording a voice memo” on page 16
12 Captured date and
time
Shows the date and time that the photo
was taken.
Note
You cannot change the LCD configuration in the
following situations:
• The camera is set to manual exposure.
• You are recording or playing movie clips or
audio files.
• You are playing a slide show.
• You are viewing thumbnail images.
• You are trimming a still image.
# Description For additional information, see...
Tips
To turn your camera on without the startup and
operating sound, press and hold Power or
Playback for 1.5 seconds.
Note
To save battery power, the LCD turns off
automatically after one minute of inactivity (no
button pressed). To turn the LCD back on, press
any button other than Power. You can change the
power save settings in the Setup menu (see
“Using the Setup menu” on page 10).
After power save has been active for one minute,
your camera turns off completely. Press Power or
Playback to turn your camera back on.
Power save does not turn the camera off in the
following situations:
• You are recording or playing movie clips or
audio files.
• You are playing a slide show.
• You are connecting the camera to a computer
or printer with the USB cable.

Insignia NS-DSC7P-09 Specifications

General

Brand	Insignia
Model	NS-DSC7P-09
Category	Digital Camera
Language	English