20
NS-DWH2BS8/NS-DWH2SS8/NS-DWR2BS8/
NS-DWR2WH8/NS-DWR2SS8
www.insigniaproducts.com
Filling the rinse aid dispenser
Your dishwasher is designed to use a liquid rinse aid. The use of rinse aid
greatly improves drying performance after the final rinse. Do not use a
solid or bar-type rinse aid. Under normal conditions, the rinse aid will last
approximately one month. Try to keep the dispenser full, but do not over
fill it.
1 Turn rinse aid dispenser cap 1/4 turn counterclockwise and lift it out.
2 Add rinse aid until liquid touches the indicated fill level. Do not overfill
since this can cause oversudsing. Wipe up any spills with a damp cloth.
The dispenser holds enough for 35 to 140 washes, depending on the
dial setting.
3 Replace the cap and turn it 1/4 turn clockwise.
To Next Page
Loading...
