EasyManua.ls Logo

Insignia NS-DWH2BS8 - Cleaning the Air Gap; Protecting Dishwasher for Long Periods

Insignia NS-DWH2BS8
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Top Control Dishwasher
www.insigniaproducts.com
The inside of the dishwasher is self-cleaning under normal use. If needed,
the tub gasket can be cleaned with a damp cloth. Use a brush to clean the
opening in the end of the gasket.
Cleaning the air gap
If there is an air gap installed with your dishwasher, make sure it is clean so
the dishwasher will drain properly. Air gap is not part of your dishwasher.
Before you clean the air gap, turn off the dishwasher, then remove the
plastic air gap cover and clean with a toothpick.
Protecting your dishwasher for long
periods
Your dishwasher should be protected from freezing if you plan to leave it
for extended periods in an unheated place. Have a qualified person do the
following:
To disconnect service:
1 Turn off the electrical power to the dishwasher at the supply source by
moving fuses or tripping circuit breaker.
2 Turn off the water supply.
NS-DWH2_BS8_SS8_NS-DWR2_BS8_WH8_SS8_17-0336_MAN_V1_ENG.fm Page 25 Thursday, June 29, 2017 9:38 PM

Other manuals for Insignia NS-DWH2BS8

Related product manuals