EasyManua.ls Logo

Insignia NS-DWR3SS1 - Filling the Rinse Aid Dispenser

Insignia NS-DWR3SS1
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Top Control Dishwasher
www.insigniaproducts.com
Filling the rinse aid dispenser
Your dishwasher is designed to use a liquid rinse aid. The use of a rinse aid
greatly improves drying performance after the final rinse. Do not use a
solid or bar-type rinse aid. Under normal conditions, the rinse aid will last
approximately one month. Try to keep the dispenser full, but do not
overfill it.
1 Turn rinse aid dispenser cap 1/4 turn counterclockwise and lift it out.
2 Add rinse aid until liquid touches the indicated fill level. Do not
overfill since this can cause oversudsing. Wipe up any spills with a
damp cloth. The dispenser holds enough for 35 to 140 washes,
depending on the dial setting.
3 Adjust the rinse aid dial, if necessary. See Using rinse aid on page 22
for information on proper adjustment of the rinse aid setting.
4 Replace the cap and turn it 1/4 turn clockwise.
Dispenser cap
More rinse aid
Less rinse aid

Other manuals for Insignia NS-DWR3SS1

Related product manuals