C
Christian JohnsonAug 20, 2025
How to fix Insignia NS-DWR3SS1 Dishwasher that won't start?
- MMr. Jose Bryant MDAug 20, 2025
If your Insignia dishwasher isn't starting, ensure the door is fully closed and latched. Also, check that the power is connected and turned on. If the delay start option is selected, refer to the “Delay” section under Controls and indicators on page 11. If the child lock is activated, deactivate it by referring to the “Child lock” section under Cycles on page 9. Ensure the dishwasher door was closed within four seconds after pressing START/Cancel. If the dishwasher was opened during an active cycle, carefully open the door, press the START/Cancel button, and then close the door again.