23
www.insigniaproducts.com
16-Cycle 4.4 Cu. Ft. Front Load Electric Dryer
INSTALLATION INSTRUCTIONS
Step 4: Installing the drain hose (optional)
You can set up your dryer to automatically drain water with the included drain
hose. If you don’t want to connect the drain hose, water will collect in the water
reservoir and you’ll need to empty it after each use.
1 Remove the drain hose from the holder.
2 Disconnect the hose from the water reservoir inflow.
3 Insert the drain hose and the external drain hose into the connector.
4 To drain the water:
A Put the hose in a sink.
OR
Note: To prevent leakage, there is tension between the hose and inflow. You
may need to exert force to disconnect the hose.
External drain hose
Connector
Drain hose
Condensing
drain hose
33" (2.5 cm max.
To Next Page
Loading...
Need help?
General
