INSTALLATION INSTRUCTIONS
22
www.insigniaproducts.com
In a floor drain system
• Place the drain hose into the floor drain system. The weight of the hose and
gravity keep the drain hose in the drain.
Notes:
• A floor drain system requires a siphon break (not included). The siphon break must
be a minimum of 24 in. (61 cm) from the bottom of your washer.
• If the drain hose on your washer is shorter than the siphon break distance, attach
an extra drain hose (not included) to your washer’s drain hose.
24 in. (61 cm) min.
Floor drain
To Next Page
Loading...
