9
NS-FWM45W3
www.insigniaproducts.com
SAFETY & PRECAUTIONS
7
Pre Soak button
Press to add a pre-soak to the selected cycle.
This option begins with a brief tumble and then proceeds to
soak the clothes with water and detergent for a specified period
of time. Once complete, the cycle will begin automatically.
The Pre Soak time will add an additional 20-30 minutes to the
overall wash time.
8
My Cycle
button
• Press and hold for three seconds to save the currently
selected wash cycle, soil level, spin speed, and wash temp.
• Press to use your pre-programmed cycle.
9
Power
button
Press to turn your washer on or off, or to “wake up” the display.
Note: Pressing the power button does not disconnect your washer from the
power supply.
10
Signal button
Press to turn the beep signal on or off. A single beep indicates a
valid option selected. A double beep indicates an invalid option.
11
Water Plus
button
Press to increase the water level in the main wash in the Bulky,
Heavy Duty, Whites, Sanitize, Towels, Delicates, Active Wear, and
Perm Press cycles.
12
Child Lock
button
• Press and hold for three seconds to lock the controls so that
a child can’t accidentally start your washer by touching the
controls.
• Press and hold for three seconds to unlock the controls.
Note: The Power button still works even when the child lock is turned on.
13
Soil button
Press to cycle through the soil level of the clothes you are
washing. Options include Extra Light>Light>Medium>
Heavy>Extra Heavy. Decreases or increases the wash time. See
Soil level
on page 31.
14
Door lock
indicator
Lights to indicate that the door of your washer is locked.
15 Temp. button
Press to select the water temperature. You can select Tap
Cold>Cold>Warm>Hot>Extra Hot. For more information, see
Water temp.
on page 31.
16 Spin button
Press to cycle through the available spin speeds of the final
cycle. Options include No Spin>Low>Medium>High>Extra
High. Higher spin speeds are not available on certain cycles,
such as Delicates. See Spin speed
on page 31.
17 Delay button
Press to set a delayed end time. See Step 6: (Optional) Setting a
delayed end time on page 28.
18
Start/Pause
button
• Press to start or pause the cycle.
• Press to start the delay countdown after setting a delayed
end time.
# ITEM DESCRIPTION
To Next Page
Loading...
