10
NS-HDRAD2 Tabletop HD Radio Receiver
www.insigniaproducts.com
Using your Tabletop HD Radio
Turning your radio on and off
• Press (power).
Selecting the source
• Press SOURCE to toggle between Tuner and AUX. The source you
select appears on the display. Tuner mode is the default mode when
you turn your radio on.
Adjusting the volume
• After you select the source you want, press VOLUME+ or – to set the
volume to a comfortable level.
Tuning to a station
• Press the TUNING+/– buttons momentarily to tune the FM radio up or
down. Press and hold the buttons for more than one second to search
for the next or previous station.
Storing preset stations in memory
Your Tabletop HD Radio can store 20 FM stations in memory. When you
store a station in memory, you can tune to the stored (preset) station by
repeatedly pressing PRESET+ or PRESET–.
1 Press SOURCE to select Tuner mode.
2 Press the TUNING+/– buttons to tune to the station you want to store.
3 Press MEMORY once to store the station. “PRESET 01” shows on the
display and “01” flashes on the display.
4 Press PRESET+/– repeatedly until the display shows the preset
number you want to save.
5 Press MEMORY again to complete the operation.
Tuning to a preset station
• Press PRESET+/– to go to the next higher or lower preset station.
Clearing preset stations
• To clear all presets, press and hold the MEMORY and SOURCE buttons
at the same time.
NS-HDRAD2_15-0849_MAN_V1_ENG.fm Page 10 Monday, December 7, 2015 5:56 PM
To Next Page
Loading...
