11
NS-HDRAD2 Tabletop HD Radio Receiver
www.insigniaproducts.com
Using HD Radio Technology
Tuning to an HD Radio station
• In tuner mode, press the HD SEEK+ or HD SEEK– button to seek the next
or previous HD Radio station or HD Radio multicast station. “ ”, “FM,”
a signal strength indicator, and tuning frequency are shown together
on the display. The station information is displayed on the top line of
the display, and the station call letters, the artist’s name, and the name
of the song are shown on the bottom line of the display. Anything that
can’t be displayed on one line crawls across the display.
Tuning to an HD Radio multicast station
If several HD Radio stations are available on a multicast station, “HD-1” is
displayed (and remains on the display) with the station information on the
top line of the display. The station details are shown on the bottom line of
the display.
• To tune to additional HD Radio stations on the multicast station, press
TUNING +/- or HD SEEK+/- to select HD-2, HD-3, and so on. The radio
tunes to the next higher frequency when the last HD Radio multicast
station is reached. To return to the first multicast station (HD-1), press
TUNING–.
Playing music from an external sound source
1 Connect an external sound source, such as an MP3 player, by plugging
an audio cable with a 3.5 mm plug (not included) into the AUX IN jack
on the back of your radio.
2 Press SOURCE repeatedly to select AUX. “AUX” appears on the
display.
3 Start playback on the external device.
4 Press VOLUME+ or – to adjust the volume.
5 Control playback using the controls on the external device.
Using headphones
Connect headphones with a 3.5mm connector to the Headphone jack.
The speakers are automatically switched off when the headphones are
being used.
Caution
Listening to music at high volume for long periods of time can
damage your ears.
NS-HDRAD2_15-0849_MAN_V1_ENG.fm Page 11 Monday, December 7, 2015 5:56 PM
To Next Page
Loading...
