EasyManua.ls Logo

Insignia NS-HDRAD2 - Troubleshooting

Insignia NS-HDRAD2
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
NS-HDRAD2 Tabletop HD Radio Receiver
www.insigniaproducts.com
Troubleshooting
Problem Solution
My radio won’t turn on. Make sure that the power cord is fully inserted in the power
outlet and firmly connected to the DC IN jack on the back.
If running on batteries, make sure the batteries are not dead.
No sound. Make sure that power is connected and your radio is turned on.
Make sure that the volume is not extremely low.
Make sure that your external device is turned on and is playing.
Make sure that the volume on your external device is turned up
and is not set to mute.
My radio will not play in FM. Make sure that your radio is set to FM.
Make sure that the radio is correctly tuned to an FM station.
Make sure that the FM antenna is extended.
FM radio reception sounds
distorted or fuzzy.
Extend your antenna or move your radio closer to a window to
improve reception.
The HD Radio™ sound keeps
switching between Digital
and Analog audio. HD
Radio™ indicator keeps
turning on and off.
You may be out of range of the HD Radio station’s area. Extend
your antenna or move your radio closer to a window to improve
reception.
My radio won't control my
MP3 player.
You need to use the controls on your MP3 player to control
playback.
Are AM stations available on
this radio?
•No.
How do I clear my presets? •Press and hold the MEMORY and SOURCE buttons at the same
time.
NS-HDRAD2_15-0849_MAN_V1_ENG.fm Page 12 Monday, December 7, 2015 5:56 PM

Related product manuals