www.insigniaproducts.com
10
66" Metal & Glass TV Stand
STEP 6 - Install the top shelf.
You’ll need
1 Place the top glass shelf (7) on top of your stand with the holes facing down.
2 Insert four 6 × 35 × 10 mm Allen bolts (C) through the holes on the bottom of the front and back crossbars and into the
holes on the bottom of the shelf.
3 Use the Allen wrench (E) to fully tighten the bolts.
4 Use the Allen wrench (E) to tighten all the bolts you installed in the previous steps.
7 Top glass shelf (1)
C 6 × 35 × 10 mm Allen bolt
(4)
E Allen wrench (1)
To Next Page
Loading...
