11
Soundbar Home Theater Speaker with Bluetooth
www.insigniaproducts.com
Second step - Connecting your soundbar
Digital Optical connection (best)
1 Connect one end of the digital optical cable (not included) to your
soundbar.
2 Connect the other end into the Digital Optical Output port on your
audio source device.
3 Change the device’s audio output to 'PCM' format (typically found in
audio settings). Refer to the documentation that came with your audio
source device for more information.
4 Go to "Third step - Connecting the AC adapter" on page 14.
Digital optical cable
(not included)
Back of the soundbar
Audio source (TV,
Blu-ray, or cable box)
NS-HSB318_17-0227_MAN_V1_ENG.fm Page 11 Tuesday, March 14, 2017 12:13 PM
To Next Page
Loading...
