19
Soundbar Home Theater Speaker with Bluetooth
www.insigniaproducts.com
Using your soundbar
This system lets you access four different sound sources (Source 1 - Optical,
Source 2 - LINE IN, Source 3 - USB, and
- Bluetooth).
Listening to your soundbar
1 Press the
(Power) button to turn on your soundbar. The power indicator
turns off.
2 Turn on the audio source device connected to your soundbar and begin
playback.
3 Press the
button on the soundbar repeatedly to select the audio
source or press the selected source button on the remote control until you
hear sound from your soundbar.
4 Adjust the volume on your soundbar or the source audio device to a
comfortable level.
5 Press the
(Power) button again to turn off your soundbar. The standby
indicator lights red.
Note
If you use the OPTICAL connection, you must change
your device’s audio output setting to “PCM” format.
Refer to the manual you received with the output
device for additional information.
Warning
Continuous use of high volume sound may
permanently damage your hearing.
NS-HSB318_17-0227_MAN_V1_ENG.fm Page 19 Tuesday, March 14, 2017 12:13 PM
To Next Page
Loading...
