18
NS-HSB318
www.insigniaproducts.com
6 Secure two screws (not included) to the wall or wall anchors (if required).
The screws must protrude from the wall by about ¼" (6.35 mm). Use a #10
wood screw (or similar), 1½" (3.8 cm) in length. The screw width must be
about 3/16" (4.76 mm) and the screw head must be approximately ¼" to
3/8" (6.35 to 9.5 mm).
7 Align the speaker hanging brackets with the screws, then hang the
soundbar on the screws.
Warning
Improper installation can result in serious injury or
damage to your soundbar. If necessary, seek the
assistance of a professional.
Approx.
¼
"
(6.8 mm)
Wall
20.43
"
(51.9 cm)
NS-HSB318_17-0227_MAN_V1_ENG.fm Page 18 Tuesday, March 14, 2017 12:13 PM
To Next Page
Loading...
