14
NS-HSB318
www.insigniaproducts.com
Third step - Connecting the AC adapter
After you have connected your soundbar to an audio source, you need to
connect it to an AC power outlet.
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
2 Plug the other end of the AC adapter into a power outlet or surge
protector.
Connecting your soundbar using Bluetooth
Before you can use your soundbar with a Bluetooth device, you need to pair
your device to the soundbar.
Pairing your devices
1 Select Bluetooth as the input source by pressing the (Bluetooth) button
on the remote control or the
(
source) button on the soundbar. The
Bluetooth indicator on the soundbar blinks slowly.
2 Navigate to your device's Bluetooth settings, turn on Bluetooth, then
search for available devices. For additional information on pairing your
device, see your device’s documentation.
3 On your Bluetooth device, select “NS-HSB318” from the device list. Repeat
steps 1-2 if “NS-HSB318” is not displayed.
Cautions
• Make sure that the electrical outlet matches the
AC adapter’s input requirements of 100-240 V,
50/60 Hz before connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other
connections have been made.
Notes
• Your soundbar must be on to make a Bluetooth
connection.
• Place the Bluetooth device within 30 ft. (10 m) of
your soundbar.
NS-HSB318_17-0227_MAN_V1_ENG.fm Page 14 Tuesday, March 14, 2017 12:13 PM
To Next Page
Loading...
