Insignia NS-HTVLGTILT-C - Tilt Range; VESA TV Screw Hole Patterns; Tools Needed for Installation

www.insigniaproducts.com
4
TV Wall Mount
Tilt range
For more information, see STEP 7 - Make adjustments on page 14.
VESA TV screw hole patterns
Your wall mount works with the following VESA TV screw hole patterns:
Tools needed
You will need the following tools to assemble your new TV wall mount:
100 × 100 mm (3.9 × 3.9") 300 × 300 mm (11.8 × 11.8") 400 × 400 mm (15.7 × 15.7")
200 × 200 mm (7.9 × 7.9") 400 × 200 mm (15.7 × 7.9") 500 × 400 mm (19.7 × 15.7")
300 × 200 mm (11.8 × 7.9") 400 × 300 mm (15.7 × 11.8") 600 × 400 mm (23.6 × 15.7")
5°
Simulated 55" TV
10°
Drill
Edge-to-edge
stud finder (for
wood stud wall)
Level
Phillips
screwdriver
Measuring tape
1/8 in. (3 mm) wood drill bit
(for wood stud wall)
Hammer (for concrete
wall)
Tape
Pencil
7/16 in. (11 mm)
socket wrench
Awl (for wood
stud wall)
OR
3/8 in. (10 mm)
masonry drill bit (for
concrete wall)