EasyManuals Logo

Insignia NS-HURSK18 Quick Setup Guide

Insignia NS-HURSK18
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FEATURES
Transmitter
Receiver
Remote
Speakers
SETTING UP YOUR SPEAKER KIT
Choosing your connection
Look at your sound source device and choose the connection option that
ts your audio source (Digital Optical or AUX).
Note: You can connect several devices and switch the sound source as required.
Connecting the transmitter
Digital Optical connection (BEST)
1 Connect one end of the digital optical cable (included) to the OPTICAL
IN port on the transmitter.
2 Connect the other end into the Digital Optical Output port on your
audio source device.
3 Connect one end of another digital optical cable (included) to the
OPTICAL OUT port on the transmitter.
4 Connect the other end to your soundbar.
5 Change the devices audio output to RAW format (typically found in
audio settings). Refer to the documentation that came with your audio
source device for more information.
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter NS-HURSK18 in the search box,
then press ENTER. Next to Features, click Support & Downloads, then
next to User Guide, click the language you want.
PACKAGE CONTENTS
Transmitter
• Receiver
• Remote control
• Speakers (2)
10-foot speaker wires (2)
3.5 mm audio cable
Before using your new product, please read these instructions to prevent any damage.
OPTION 1: AUX connection (good)
1 Connect one end of a 3.5 mm audio cable (included) to the AUX IN
jack on the transmitter.
2 Connect the other end of the 3.5 mm audio cable into the Audio
Output port on your audio source device, such as a tablet or mobile
device.
3 Connect one end of another 3.5 mm audio cable (not included) to the
AUX OUT jack on the transmitter.
4 Connect the other end of the 3.5 mm audio cable to the soundbar.
QUICK SETUP GUIDE
Universal Rear
Speaker Kit
NSHURSK18
Power indicator
Lights red when the receiver is in standby mode.
Blinks blue when the receiver is in pairing mode.
Lights blue when the receiver is on and paired with the transmitter.
DC IN
jack
Pairing
button
Speaker jacks
VOLUME
MASTER
SOURCE
OPTICAL
AUX
+
_
+
_
+
_
SOUND MODE
SURROUND
STEREO
DELAY REAR
NS-HURSK18
Power button
SOURCE
Rear speakers (only)
volume buttons
DELAY
Mute button
SOUND MODE
MASTER VOL +/– buttons
(Main and rear speakers)
SURROUND
ON/OFF
PAIR
5V 1A
OPTICAL AUX
Optical
indicator LED
Power
button
AUX indicator LED
Source
button
Volume
down/up
Dolby
indicator LED
PCM indicator LED
Power indicator
Lights red when the transmitter
is in standby mode.
Blinks red when the transmitter
is muted.
Turns o when the transmitter
is turned on.
IR
sensor
DC IN
jack
SURROUND
ON/OFF and
PAIR button
Factory
only
Optical
out jack
Optical
in jack
AUX out
jack
AUX in
jack
3.5 mm male to RCA female adapter
3.5 mm female to RCA male adapter
AC adapter 5V 1A
AC adapter 12V 1.5A
Optical cable (2)
Quick Setup Guide
5V 1A
AC adapter
Back of the transmitter
Digital optical cable
(included)
Audio source
(TV, Blu-ray,
or cable box)
Soundbar
Back of the transmitter
5V/1A
AC adapter
Soundbar
3.5 mm
audio cable
Audio source
(TV)
Speaker
Hanging
hole
Speaker
jacks

Other manuals for Insignia NS-HURSK18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-HURSK18 and is the answer not in the manual?

Insignia NS-HURSK18 Specifications

General IconGeneral
BrandInsignia
ModelNS-HURSK18
CategorySpeakers
LanguageEnglish

Related product manuals