Assembling your TV stand
Step 1: Setting up the base
A Insert six wooden dowels (FF)into the base (A), then screw six cam screws
(BB) into smaller holes with a Phillips screwdriver.
B Align the supports (B) with the wooden dowels and the cam screws on the
base. The cam lock holes on the sides of the supports should face the front
edge of the base. Insert six cam locks (CC) into the cam lock holes, then use
a Phillips screwdriver to secure.
You’ll need:
FF (6)
BB (6)
CC (6)
Phillips
screwdriver
www.insigniaproducts.com
9
TV Stand with Gaming Nook
To Next Page
Loading...
