38
www.insigniaproducts.com
Using DVD last memory
Your DVD/TV combo can remember where a DVD
stops playing when you turn off your
TV/DVD combo. When you turn on your
TV/DVD combo and start playback, playback
resumes at the point where it was stopped.
To use DVD last memory:
1 While your TV/DVD combo is in DVD mode,
press SETUP. The icon is highlighted.
2 Press OK/ENTER. The GENERAL SETUP PAGE
opens.
3 Press or to highlight LAST MEMORY, then
press OK/ENTER.
4 Press or to highlight ON or OFF, then press
OK/ENTER.
5 Press one or more times to go back to the
previous menu.
6 To close the menu, press to highlight the
icon, then press OK/ENTER.
Setting up DVD speaker output
To set up DVD speaker output:
1 While your TV/DVD combo is in DVD mode,
press SETUP. The icon is highlighted.
2 Press or to highlight (audio), then press
OK/ENTER. The AUDIO SETUP PAGE opens.
3 Press or to highlight SPEAKER SETUP, then
press OK/ENTER. The second SPEAKER SETUP
PAGE opens.
4 Press or to highlight DOWNMIX, then press
OK/ENTER.
5 Press or to highlight Lt/Rt or STEREO, then
press OK/ENTER.
• Lt/Rt—On a disc recorded with a
multichannel soundtrack, the output signal is
incorporated into the left and right channels.
• STEREO—On a disc recorded with a
multichannel soundtrack, the output signal is
incorporated into stereo.
-- GENERAL SETUP PAGE --
LAST MEMORY
TV DISPLAY
CAPTIONS
SCREEN SAVER
TV OUTPUT
GOTO GENERAL SETUP PAGE
OFF
ON
YPbPr
OFF
WIDE
-- GENERAL SETUP PAGE --
TV DISPLAY
NORMAL/LB
WIDE
CAPTIONS
ON ON
TV OUTPUT
YCbCr
SCREEN SAVER
OFF
OFF ON
OFF
OFF ON
OFF
LAST MEMORY
YPbPr YPbPr
WIDE
NORMAL/PS
-- GENERAL SETUP PAGE --
LAST MEMORY
TV DISPLAY
CAPTIONS
SCREEN SAVER
TV OUTPUT
GOTO GENERAL SETUP PAGE
OFF
ON
YPbPr
OFF
WIDE
-- AUDIO SETUP PAGE --
SPEAKER SETUP
DOLBY DIGITAL SETUP
CHANNEL EQUALIZER
3D PROCESSING
GOTO AUDIO SETUP PAGE
-- SPEAKER SETUP PAGE --
DOWNMIX STR Lt/Rt
STEREO
AUDIO SETUP
To Next Page
Loading...
