Insignia NS-LDVD19Q-10A - 19" LCD TV - Setting up DVD Dolby Digital; Using the DVD Equalizer

To Next Page

To Previous Page

www.insigniaproducts.com

6 Press one or more times to go back to the

previous menu.

7 To close the menu, press to highlight the

icon, then press OK/ENTER.

Setting up DVD Dolby Digital

To set up DVD Dolby Digital:

1 While your TV/DVD combo is in DVD mode,

press SETUP. The icon is highlighted.

2 Press or to highlight (audio), then press

OK/ENTER. The AUDIO SETUP PAGE opens.

3 Press or to highlight DOLBY DIGITAL

SETUP, then press OK/ENTER. The DOLBY

DIGITAL SETUP PAGE opens.

4 Press or to highlight DUAL MONO or

D.R.C., then press OK/ENTER.

• DUAL MONO—Output mode for the left and

right signals for the selected audio output. If

you set this setting to MIXED MONO, the

setting only works when the DVD uses

5.1-channel sound.

• D.R.C.—Adjusts the linear compression rate to

obtain different compression results for the

signals.

5 Press or to highlight STEREO, LEFT MONO,

RIGHT MONO, or MIXED MONO, then press

OK/ENTER.

6 Press or to change the setting, then press

OK/ENTER.

7 Press one or more times to go back to the

previous menu.

8 To close the menu, press to highlight the

icon, then press OK/ENTER.

Using the DVD equalizer

You can select preset graphic equalizer patterns

according to the genre of the music being played.

You can also adjust the equalizer settings.

To use the DVD equalizer:

1 While your TV/DVD combo is in DVD mode,

press SETUP. The icon is highlighted.

2 Press or to highlight (audio), then press

OK/ENTER. The AUDIO SETUP PAGE opens.

-- GENERAL SETUP PAGE --

LAST MEMORY

TV DISPLAY

CAPTIONS

SCREEN SAVER

TV OUTPUT

GOTO GENERAL SETUP PAGE

OFF

YPbPr

OFF

WIDE

-- AUDIO SETUP PAGE --

SPEAKER SETUP

DOLBY DIGITAL SETUP

CHANNEL EQUALIZER

3D PROCESSING

GOTO AUDIO SETUP PAGE

FULL

3/4

1/2

1/4

OFF

- - DOLBY DIGITAL SETUP - -

DUAL MONO STR

LEFT MONO

STEREO

RIGHT MONO

MIXED MONO

D.R.C

AUDIO SETUP